We specialize in supplying Specialty pumps to solve the most difficult pumping applications. We offer two types of pumps for your needs, positive displacement screw pumps and centrifugal pumps. Each has its own benefits and we apply those pumps best suited to each pumping application.

Every pump situation has its unique characteristics that make them unlike any other and our factory trained engineers are available 24 hours a day to help you in whatever situation may arise.

We carry a wide selection of specialty positive displacement and specialty centrifuge pumps for commercial applications. Our pump lines include:

The most common application is pumping thickened sludge in the processing of wastewater in sewage treatment plants and in industrial wastewater applications. Some additional progressive cavity pump applications are drilling mud for drilling oil wells. Ground water remediation where the pumps are used to feed filtration to clean ground water, pumps are used to pump liquid explosives in mining applications, pumping thick food products like cookie dough and many more.

For more information about progressing cavity pumps, please click here

Speck Pump is recognized as an industry leader in hot-oil transfer pumping with flow rates up to 880 GPM on some models as well as Mechanical and Magnetic seal options which are used extensively throughout many of the following industries:

• Tempering Devices in Plastics and Die Casting
• Baking Ovens and large industrial frying units
• Tar and Asphalt Plants
• Heating in the leather and rubber industry
• Paint manufacturing
• Press heating of papers and pulps
• Laundries

Contact your sales representative today for more information about out new line of Speck Pumps!

For more information about Speck pumps, please click here

We stock EDUR pumps in sizes from 10 gpm up to 220 gpm. Pump materials available are cast iron, 316 stainless steel and super duplex stainless steel. Dissolved Air Flotation is the most common application where the EDUR pump is used to provide dissolved air to a flotation tank to float and remove solids. The EDUR pump is very innovative in this application. The previous design standard was to use a standard pump and inject the required air using an air compressor feeding a saturation tank via an air control panel. The tank was fed with water from a standard centrifugal pump.

With the EDUR pump, no compressed air or saturation tank is needed. In addition an overall power savings of 40% is achieved due to not requiring a compressor. Shanley Pump and EDUR introduced this innovation to the North American market in 1996 and the results have been astounding. There are now thousands of EDUR pumps in this application all over North America. The pump is also used in a variety of industries like Municipal and industrial wastewater applications, Dairies, Rendering plants, Slaughter houses, Mining and are now used extensively in the petroleum industry.

For more information about EDUR Pumps, please click here

Tecnium is a leading professional line of Engineered Plastic pumps. Tecnium has been manufacturing in Barcelona Spain since 1957. They make safe reliable plastic pumps for the most extreme corrosion applications.

Tecnium has 5 product lines, a horizontal pump, a close coupled pump a vertical dry mount and wet pit pump and the newest line is a Tecnium magnetic drive pump capable of running dry. The Tecnium pumps are available in 6 different plastic materials, to suit most corrosive pump applications.

For more information about Tecnium Pumps, please click here

We stock several series of three rotor pumps at Shanley Pump and Equipment, Inc. We stock *Allweiler® brand pumps and spare parts and we also stock SEIM brand pumps and spare parts.

For More Information about *Allweiler® Three Rotor Screw Pumps please click here

The Shanley Pump and Equipment, Inc. brand of 2 rotor screw pumps is a heavy-duty pump that is ideal for larger flow applications like crude oil loading and unloading for shipping and tank farm applications.

The pump is ideal because it can pump a variety of fluids it can lift from below; it can run dry and is ideal for large flow like rail cars, ships and tank farms. These pumps are custom made for the application and provide the user with a reliable long service life pump. The pump is available in cast iron carbon steel and stainless steel Allweiler® brand series

For more information about Two Rotor Screw Pumps, please click here

We stock a complete line of *Allweiler® NTT hot oil pumps. These are horizontal centrifugal pumps that are capable of pumping thermal oil at 660 degrees F (350C) and require no additional coiling. We stock these pumps with nodular (ductile) cast iron casings.

The pumps have 150 pound raised face flanges and are available for immediate delivery. In addition to the NTT series from Allweiler®, we can also offer higher series of thermal oil pumps like the new Allweiler® CNH-ML series of seal less, magnet drive pump rated up to 660 degrees F (350 C).

For more information about NTT Pumps,
please click here

We stock boiler feed pumps made by OSNA at our facility. This heavy-duty pump series in our inventory is rated from 10 to 1000 gpm at up to 1000 feet of head.

In addition to the series we stock, OSNA also has other series of pumps available for pumping applications up to 4800 gpm and at discharge heads up to 2100 feet. The pumps are available in cast iron, bronze and stainless steel.

For more information about OSNA Pumps,
please click here

SEIM is one of our newest product lines and offers an innovative three rotor pump which is ideal for OEM lubrication applications of heavy equipment like compressors.

For more information about SEIM Pumps,
please click here

Hilge is a high end sanitary centrifugal pump. We stock pumps and spare parts. The pumps are made from rolled steel instead of cast parts so the surface finish is superior for sanitary applications.

The pumps have been manufactured in Mainz Germany since 1867 and all German breweries use Hilge pumps.

For more information about Hilge Pumps,
please click here