Close Menu

EDUR®
Pumps

Edur Pumps

EDUR Specialty Centrifugal Wastewater, DAF, Vortex, Peripheral & General Purpose Pumps

Edur LBU Pump

EDUR Pumps are designed especially for use in applications where liquids and gases are present and mixed. This pumping application is very challenging if not impossible with standard centrifugal pumps and they would fail due to cavitation destroying the pumps. Shanley Pump and Equipment, Inc. stocks a complete line of EDUR Specialty centrifugal pumps.

The EDUR pump is specifically designed with a unique pump impeller and casing designs that enable it to pump liquid/gas mixtures without cavitation. We keep pumps in our inventory complete with standard TEFC motors, completely tested and ready to ship. We stock EDUR pumps in sizes from 10 gpm up to 220 gpm. Pump materials available are cast iron, 316 stainless steel and super duplex stainless steel.

Contact Us
847-439-9200
I agree to the Terms & Conditions

Dissolved Air Flotation is the most common application where the EDUR pump is used to provide dissolved air to a flotation tank to float and remove solids. The EDUR pump is very innovative in this application. The previous design standard for DAF Systems was to use a standard pump and inject the required air using an air compressor feeding a saturation tank via an air control panel. The tank was fed with water from a standard centrifugal pump.

Edur has several styles of DAF pumps to Select from with different flow rates and types, such as centrifugal and peripheral pump types. For more information about DAF pumping systems please click here to learn more about DAF pumping.

With the EDUR pump, no compressed air or saturation tank is needed in the operating system. In addition an overall power savings of 40% is achieved due to not requiring a compressor allowing greater energy efficiency than other DAF Pump Manufacturers. EDUR pumps can fully retrofit your existing DAF system.

EDUR introduced this innovation to the North American market in 1996 and the results have been astounding. There are now thousands of EDUR pumps in this application all over North America.

The pump is also used in a variety of industries like Municipal and industrial wastewater applications, Dairies, Rendering plants, Slaughter houses, Mining Operations and are now used extensively in the petroleum industry.

EDUR is a family owned pump manufacturer located in Kiel, Germany. The EDUR brand name has been known worldwide for building a variety of specific pumps for specialized applications since its inception in 1927.

EDUR centrifugal pumps differ considerably from other Centrifugal Pump Designs with their engineering to handle entrained gases in liquids without causing cavitation.

EDUR Pump Parts

Allweiler® OEM Replacement Pump Bearings

EDUR Bearings

Allweiler® OEM Replacement Pump Gaskets

EDUR Gaskets

Allweiler® OEM Replacement Pump Seals

EDUR Seals

Allweiler® OEM Replacement Pump Impellers

EDUR Impellers

Allweiler® OEM Replacement Pump Flanges

EDUR Flanges

EDUR LBU Series

EDUR LBU Series

Multistage design of multiple impellers in a segmented pump design on a central shaft to increase flow and pressure.

EDUR PBU Series

EDUR PBU Series

A centrifugal pump for DAF and Gas-Liquid pumping applications, reliably pump entrained gases in liquids, with gas contents of up to 15%.

EDUR VBU Series

EDUR VBU Series

The VBU High-Pressure Vertical Multistage Pump is a professional’s choice for the pumping of clean and slightly polluted liquids.


EDUR Pumps - Parts and Repair Services by Shanley Pumps and Equipment.

We stock replacement parts and upgrades for the EDUR line of pumps and pump products. From seals and impellers to entirely rebuilt systems.

If you are looking to repair your current pump system or even rebuild your current one, contact us today and ask for one of our factory trained engineers at 847-439-9200.

Shanley Nationwide Distribution network

Map of distributors and factory trained representatives for Shanley Pump & Equipment throughout the continental USA

We have distributors and factory trained representatives throughout the continental USA. If your company requires service or repair, a sales representative is only a phone call away. Contact us today at 847-439-9200 or email us. We look forward to serving you!

*Shanley Pump Group is not affiliated with nor distributor for Seepex®, Allweiler®, Moyno®, Tarby®, Netzsch®, or Continental Inc.® all referenced product names, brands, models, or part numbers is solely for identification purposes. Seepex® is a registered trademark of Seepex®. Moyno® and Tarby® are registered trademarks of Robins and Myers® and NOV®, Netzsch® Incorporated is a registered trademark of the Netzsch® Group, Allweiler® is a registered trademark of Colfax® Corporations Continental® Pumps is a Trademark of Continental® Ultra Pumps.