Shanley Pump and Equipment, Inc's many years of service to the pumping community has made us a leader of engineering design services to both industrial and commercial applications.
Our many specialty pump lines serve the chemical, food, dairy, municipal, petrochemical, pharmaceutical and other industry where commercial pumping is a necessity. Shanley Pump and Equipment is recognized as a leading source for America's specialty positive displacement and specialty centrifugal pumps repairs.
When it comes time for your company to purchase a new pumping system or augment an existing one our group of factory trained engineers is the team you can count on!
We utilize state of the art Computer Assisted Design (CAD) for all of our installation to ensure that its done right the first time every time. We only a repair facility, we're also a full service manufacturer and engineering firm that can give you the best pumping system for the job.
Our 20,000 Sq. Ft. shop enables us to package large orders efficiently. Our staff includes 3 full time factory trained, technically expert pump mechanics to build pumps and packages as soon as we receive your order.
Our service technicians will go wherever the work is, from copper mines to offshore oil platforms, our commitment to excellence has kept us at the forefront of pump repair services worldwide.
All of our work is covered by a warranty which includes work on the following:
- New Pump Stators
- New Pump Screws
- New Pump Seals
- New Pump Motors
- Remanufactured Pumps
- New Pump Electronics
- New Pump Centrifuges
- New Pump Casing
Shanley Offers Pumping Services Including:
- Commercial pump removal and installation
- Commercial pump repair and parts center's throughout the USA
- Professional pump motor repair services
- Professional pump part finding services
- Pump alignment services
- On-Site Pump Repair and Installation Services
In addition, our web site has several areas to benefit the pumping professional including:
- Pump Troubleshooting guides
- Pump Manuals
- Pump Downloads
Pump Motor Repair Services
Pump motor failure will happen over the course of your owning of a pumping system The accumulated hours of accumulated wear and tear from operations service will eventually stop even the best motors currently available today.
Our service technicians carry a full array of replacement parts, both factory and economy, to fit any budget and can come to your site regardless of locale usually within 24-72 hours.
We offer both new replacement and refurbished motors from such quality manufacturers like Baldor motors and manufacturers recommended motor selections. Our goal is to get your system back online with a minimum of hassle and cost.
Pump Alignment Services
During operation, all pumps withstand vibrations caused by the revolutions of the pumping mechanism. As a result, as time goes by slight deficiencies occur due to the heavy forces being used on the pumping mechanism.
Keeping these units perfectly aligned can mean the difference between thousands of dollars in down time for repairs. Pump alignment means that the centerline of the pump is aligned with the centerline of the driver.
Although this alignment was always a consideration with packed pumps, it is critical with sealed pumps especially if you are using rotating seal designs where the springs or bellows rotates with the shaft.
Misalignment will cause many problems:
- Packing could support a misaligned shaft. A mechanical seal cannot.
- Misalignment will cause severe shaft or sleeve fretting if you use spring loaded Teflon® as a secondary seal in your mechanical seal design.
- The pump bearings can become overloaded.
- The misalignment could be severe enough to cause contact between stationary and rotating seal components.
- The wear rings can contact.
- The shaft can contact the restriction bushing often found at the end of the stuffing box.
- The shaft or sleeve can contact the stationery face of the mechanical seal.
- The shaft can contact the disaster bushing in an API (American Petroleum Institute) gland.
- The impeller could contact the volute or back plate.
If you currently own pumping systems that are in need of maintenance, why not give us a call. We have representatives throughout the USA and Canada that can not only repair or refurbish your current system, but also ensure that the pump has been properly aligned.
If you have any questions about our services, please feel free to call us or send us an email! We look forward to hearing from you.
*Shanley Pump Group is not affiliated with nor distributor for Seepex®, Allweiler®, Moyno®, Tarby®, Netzsch®, or Continental Inc.® All referenced product names, brands, models, or part numbers is solely for identification purposes. Seepex® is a registered trademark of Seepex®. Moyno® and Tarby® are registered trademarks of Robins and Myers® and NOV®, Netzsch® Incorporated is a registered trademark of the Netzsch® Group, Allweiler® is a registered trademark of Colfax® Corporations Continental® Pumps is a Trademark of Continental® Ultra Pumps.