Click here for more information about Allweiler Pumps

Allweiler Pumps
We stock a complete line of Allweiler NTT hot oil pumps. These are horizontal centrifugal pumps that are capable of pumping thermal oil at 660 degrees F (350C) and require no additional coiling. We stock these pumps with nodular (ductile) cast iron casings.

The pumps have 150 pound raised face flanges and are available for immediate delivery. In addition to the NTT series from Allweiler, we can also offer higher series of thermal oil pumps like the new Allweiler CNH-ML series of seal less, magnet drive pump rated up to 660 degrees F (350 C).

Click here for more information
about EDUR Pumps

EDUR Pumps
We stock a complete line of EDUR Specialty centrifugal pumps. EDUR pumps are designed especially for use in applications where liquids and gases are present and mixed. This pumping application is very challenging if not impossible with standard centrifugal pumps and they would fail due to cavitation destroying the pumps.

The EDUR pump is specifically designed with a unique pump impeller and casing designs that enable it to pump liquid/gas mixtures without cavitation. We keep the pumps in our inventory complete with standard TEFC motors, completely tested and ready to ship. We stock EDUR pumps in sizes from 10 gpm up to 220 gpm. Pump materials available are cast iron, 316 stainless steel and super duplex stainless steel

Dissolved Air Flotation is the most common application where the EDUR pump is used to provide dissolved air to a flotation tank to float and remove solids. The EDUR pump is very innovative in this application.

Shanley Pump and EDUR introduced this innovation to the North American market in 1996 and the results have been astounding. There are now thousands of EDUR pumps in this application all over North America.

Click here for more information
about Speck Pumps

Speck Pumps
Speck Centrifugal pumps are designed for the transport and recirculation of organic heat transfer oils on mineral and/or synthetic basis as well as hot water heat transfer applications throghout the world.

The robust design and construction of Speck pumps is due to a rigorous quality control system that begins at their manufacturing facilities where ISO:9001 requirements met throughout the entire manufacturing process resulting in a superior hot oil transfer pump.

The Speck pumps design allows handling of heated mineral and synthetic oils in heat trasnfer plants effortlessly. The pumped fluids must not chemically attack the pump materials nor contain any abrasive particles in suspension or damage to the pump may occur.

Click here for more information about Hilge Pumps

Hilge Pumps
Hilge is a high end sanitary centrifugal pump. We stock pumps and spare parts. The pumps are made from rolled steel instead of casted parts so the surface finish is superior for sanitary applications. The pumps have been manufactured in Mainz Germany since 1867 and have been in use by all German breweries since then.

Click here for more information about OSNA Pumps

OSNA Pumps
We stock boiler feed pumps made by OSNA at Shanley Pump. This heavy-duty pump series in our inventory is rated from 10 to 1000 gpm at up to 1000 feet of head. In addition to the series we stock, OSNA also has other series of pumps available for pumping applications up to 4800 gpm and at discharge heads up to 2100 feet.

The pumps are available in cast iron, bronze and stainless steel.

Click here for more information about SEIM Pumps

SEIM Pumps
SEIM Pumps is one of Shanley Pump and Equipments newest product lines and offers innovations in both three rotor and single screw pumps. The three rotor pump ideal for OEM lubrication applications of heavy equipment like compressors. For over 30 years SEIM has been supporting the pumping industry with their innovation and expertise in the pumping and handling of oils and viscous chemicals.

SEIM offers a variety of different models and configurations for every necessity. Please feel free to take a look and see what SEIM can do for you.

Click here for more information about Tecnium Pumps

Tecnium Pumps
Tecnium is a leading line of Engineered Plastic pumps. Tecnium has been manufacturing in Barcelona Spain since 1957. They make safe reliable plastic pumps for the most extreme corrosion applications.

Tecnium has 5 product lines, a horizontal pump, a close coupled pump a vertical dry mount and wet pit pump and the newest line is a Tencium magnetic drive pump capable of running dry.

The Tecnium pumps are available in 6 different plastic materials, to suit most corrosive pump applications.

Click here for more information about Shanley Pumps

Shanley Pumps
The Shanley brand of 2-rotor screw pumps is a heavy-duty pump that is ideal for larger flow applications like crude oil loading and unloading for shipping and tank farm applications.

The pump is ideal because it can pump a variety of fluids it can lift from below; it can run dry and is ideal for large flow like rail cars, ships and tank farms.

These pumps are custom made for the application and provide the user with a reliable long service life pump. The pump is available in cast iron carbon steel and stainless steel.

Click here for more information about Liberty Process Pumps

Liberty Process Pumps
Liberty Process American Pump Series Progressive Cavity Pumps are designed with a single helical rotor that eccentrically turns within a double-threaded helical stator of twice the pitch length. This unique design feature creates a series of sealed cavities 180° apart, from suction to discharge.

A constant, non-pulsating fluid flow is produced as the opposing cavities empty and fill simultaneously. Identical efficiency is always achieved without additional attachment whatever the flow direction or operating position requirement. These self-priming pumps are ideal for abrasive, low or high viscosity, delicate, shear-sensitive, corrosive or insoluble fluids.