Shanley Pump and Equipment Pumping and Metering Systems |
||||||||||
|---|---|---|---|---|---|---|---|---|---|---|
 |
||||||||||
|
||||||||||
Shanley Pump and Equipment has two brands of in-house models to both handle pumping and metering of pumps. There's the 3LS Series of pumps that are a three rotor screw pump manufactured by Shanley Pump and Equipment at our main facility. The pump has a main screw which is connected to the power source. Pump rotation is normally clockwise as viewed from the drive end. There are also two idler rotors which are driven hydraulically by the main rotor. Additionally, there's the Shanley Pump Metering System for their Allweiler ADBP and ANBP progressive cavity pumps with a highly reliable, programmable computer controller that produces constant non-pulsating, continuous flow with better than 99% repeatable accuracy for all difficult metering pump applications. If you have any questions about the 3LS Series Three Rotor Screw Pumps or our Metering Pump Systems by Shanley Pump and Equipment please feel free to contact us either by email or by contacting one of our factory-trained engineers at 847-439-9200. |
||||||||||
Shanley 3LS Series Three Rotor Screw Pump |
||||||||||
 |
The 3LS Series pump is a three rotor screw pump manufactured by Shanley Pump and Equipment at our main facility. The pump has a main screw which is connected to the power source. Pump rotation is normally clockwise as viewed from the drive end. There are also two idler rotors which are driven hydraulically by the main rotor. As the pump turns, these three screws intermesh and run inside of a pump housing. This results in closed cavities which transfer the liquid from the suction to the discharge side of the pump as the pump rotates. Due to the close tolerances of the pump design, a precise flow per pump revolution is achieved. The 3LS Series Pumps are designed for handling lubricating fluids. these fluids are found most commonly in applications where forced oil lubrication is required for rotating machinery. Other applications may include:
Many other types of services are served by these 3LS Series three rotor screw pumps, if the fluid has lubricating properties and the service is within the design parameters of the pump The 3LS Series Pumps are designed for handling lubricating fluids. these fluids are found most commonly in applications where forced oil lubrication is required for rotating machinery. A Mechanical seal is standard with an optional seal lip available. The inlet is available in both axial and radial configurations with the outlet available in radial location only. Additionally, a relief valve is an available option on all pumps. The un it is constructed from a variety of special metals, however, as a standard the following applies;
If you have any questions about the 3LS Series Three Rotor Screw Pumps by Shanley Pump and Equipment please feel free to contact us either by email or by contacting one of our factory-trained engineers at 847-439-9200.
|
 |
||||||||
Shanley Pumps Pump Metering Systems |
||||||||||
Shanley Pump and Equipment has combined their Allweiler ADBP and ANBP progressive cavity pumps with a highly reliable, programmable computer controller that produces constant non-pulsating, continuous flow with better than 99% repeatable accuracy for all difficult metering pump applications. Specifications
If you have any questions regarding the Shanley Pump Metering system please feel free to contact us either by email or by calling one of our factory trained engineers at 847-439-9200 with any questions you may have. |
|
|||||||||
|
||||||||||
Shanley Pump and Equipment, Inc. 2525 South Clearbrook Drive Arlington Heights, Il. 60005-4623 P (847) 439-9200 . F (847) 439-9388 |
||||||||||
|
||||||||||
