Thermal Oil Pumps
Thermal Oil Pumps by Shanley Pumps and Equipment
Thermal Oil Pumps
 Allweiler NTT Series
Speck Pumps

Shanley Pump and Equipment is your Thermal Oil Transfer Centrifugal pumping solution with our line of high strength and temperature resistant Allweiler NTT and Speck Centrifugal Thermal Oil Transfer Pumps.

Shanley Pump and Equipment carries a full line of Allweiler NTT series thermal oil pumps ready for immediate delivery. These are horizontal centrifugal pumps that are capable of pumping thermal oil at 660 degrees F (350°C) and require no additional coiling. Shanley Pump and Equipment holds current in-house stock of NTT pumps with nodular (ductile) cast iron casings.

We also carry a full line of the Speck Centrifugal pumps for Hot Oil transfer applications. Speck Pumps are available in either mechanical or sealless mag-drive design and can be either vertically or horizontally mounted depending upon your installation requirements.

The NTT series pumps have 150 pound raised face flanges while the Speck unit comes standard with ANSI Drilled Flanges and both are available for immediate delivery.

Contact a Shanley Pump and Equipment representative today at 847-439-9200 or email us, We look forward to your questions.

Allweiler NTT Series Thermal Oil Pumps
 
Allweiler NTT Series Centrifugal Pump

The Allweiler NTT series Centrifugal pump for heat transfer oils is an ideal solution for the handling of organic heat-transfer oils in heat-transfer plants. The NTT's unique design eliminates the need for cooling in any form due to its self-cooling characteristics over any temperature range during operation.

The NTT series advantages for the pumping of heat-transfer oils are numerous, but here are just a few:

  • Heavy Duty Bearing - Maintenance free groove ball bearings are utilized. Compared to sleeve bearing, ball bearings will absorb radial forces and temperature changes much better.
  • Easy Maintenance - Back pull out design allows bearing housing and rotating element removal without disturbing discharge and suction plumbing.
  • Quiet operation and Long service life - The Allweiler NTT series of thermal oil pumps are designed to be one of the quietist and long operability centrifugal pumps in operation today.
  • Contact a Shanley Pumps and Equipment representative for more information about the Allweiler NTT Series Thermal Oil Pumps. Email us or give us a call at 847-439-9200.
 Allweiler NTT Series Thermal Oil Pumps by Shanley Pumps and Equipment
Flow Rate (Gpm/M)
0 to 6400 GPM/ 1450 M³/Hr.
Head-Feet/Meters
Up to 145 M
Temperature Range
Up to 660° F / 350 °C
 
 

Speck Thermal Oil Pumps
 
Speck Thermal Oil Pumps From Shanley Pump and Equipment

Speck Centrifugal pumps are designed for the transport and recirculation of organic heat transfer oils on mineral and/or synthetic basis as well as hot water heat transfer applications throghout the world.

The robust design and construction of Speck pumps is due to a rigorous quality control system that begins at their manufacturing facilities where ISO:9001 requirements met throughout the entire manufacturing process resulting in a superior hot oil transfer pump.

The Speck pumps design allows handling of heated mineral and synthetic oils in heat trasnfer plants effortlessly. The pumped fluids must not chemically attack the pump materials nor contain any abrasive particles in suspension or damage to the pump may occur.

Applications for the Speck Thermal Oil Pump include but are not limited to:

  • temperature controllers in plastics industry and die cast industry
  • baking ovens, large frying units as well as in the production of edible oil and dry masses for the food / forage industries
  • heating of calenders and melting pots in leather and rubber industry
  • heating of agitators and mixing tanks for the processing of colours and lacquers
  • heating of tanks in stationary and FPSE platforms as well as in tank ships
  • heating of press lines in the wood and pulp industry
  • flat glass production
  • solar power stations and ORC processes
  • Contact a Shanley Pumps and Equipment representative for more information about the Speck Thermal Oil Pumps. Email us or give us a call at 847-439-9200.
 Allweiler NTT Series Thermal Oil Pumps by Shanley Pumps and Equipment
Flow Rate (Gpm/M)
0 to 880 GPM
Head-Feet/Meters
Up to 328'
Temperature Range
Up to 620° F
 
 
Shanley Pump and Equipment, Inc.
2525 South Clearbrook Drive
Arlington Heights, Il. 60005-4623
P (847) 439-9200 . F (847) 439-9388
 Shanley Pump and Equipment

Google • Yahoo • DMOZ • Alta Vista • Lycos

© 1988 - 2010 Shanley Pumps Incorporated.
Logo Link